 |
 |
 |
|
Xenith Pro, Race and Race Femme frames come out of
the same molds as our Xenith SL, Team and Elite series bikes. So you
know you’re getting superbly tuned cornering geometry and Euro-style fit
geometry.
High modulus Dyad Ultra
carbon fiber combined with tri-oval shaped top and down tubes—with our
Size Specific Tubing diameters—means you get incredible ride and amazing
out-of-the-saddle sprinting and climbing performance, no matter what
size frame you ride. Factor in details like asymmetrical chainstays,
forged one-piece dropouts (with replaceable derailleur hanger), and a
full carbon hollow crown fork with stainless axle interfaces and carbon
dropouts, and you’ll see these are bikes that can cut corners with the
best handlers around—but don’t shortcut any of the details that matter.
SPECIFICATIONS
Frame High and mid-modulus carbon fiber, Dyad Ultra lay-up, tri-oval shaped top and down tubes with SST tubing diameters, 1 1/8-1 1/2” head tube, PressFit 30 BB shell, asymmetrical chainstays, twin seat stays, forged one-piece dropouts with replaceable derailleur hanger
Fork Jamis Xenith Comp level, full carbon composite, 1.5” hollow formed crown, monocoque one-piece forming technology, carbon dropouts with stainless axle interfaces
Headset FSA, integrated, sealed bearing, 1 1/8-1 1/2”
Wheels Mavic Aksium Race wheelset, 20H, 24mm rim profile with UC Control and H2 technology, Mavic alloy hubs with QRM bearings and FTS-L freehub and straight pull aerodynamic stainless spokes
Tires Vittoria Zaffiro Pro Slick, 700x23c, folding
Derailleurs Shimano Ultegra RD-6700 rear and Ultegra FD-6700 braze-on front with 34.9mm alloy clamp
Shiftlevers Shimano Ultegra ST- 6700 Dual Control STI, 20-Speed Chain Shimano 10-Speed
Cassette Shimano Ultegra CS-6700 10-Speed 11-25T
Crankset Shimano 105 FC-5750 compact double, 50/34T, 165mm (44/48), 170mm (51), 172.5mm (54)
BB Set FSA PressFit 30 with Wheels Mfg. adaptors
Pedals N/A
Brakeset Tektro R540 forged alloy dual pivot calipers with SwissStop cartridge pads and Shimano Ultegra ST-6700 STI brake levers
Handlebar Ritchey Comp Logic II, 6061 double-butted aluminum, 31.8 x 380mm (44/48), 400mm (51), 420mm (54)
Stem Ritchey Comp 4-Axis, 3D net forged 6061 alloy, 6º x 90mm (44/48/51), 100mm (54)
Tape Jamis gel suede tape with Jamis logo and “J” end plug
Seat Post Jamis carbon fiber micro-adjust, 31.6 x 300mm with Jamis 7075-AL CNC aluminum 1-bolt seat post clamp
Saddle Selle San Marco SPID Glamour Arrowhead with Microfeel cover and hollow cro-moly rails
Sizes 44, 48, 51, 54cm
Color Alpine Blue/Natural Carbon
Weight 16.75lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Features /Benefits
The Race’s Femme version features female specific geometry in four sizes, with size &
gender specific handlebar, stem and saddle.
The Xenith’s Tri-Oval SST differential tubing diameters (larger diameters on larger frames,
smaller diameters on smaller frames) support big riders without punishing smaller ones.
Designing the fork to incorporate a 1.5” crown race allowed us to produce a full-hollow
fork, from steerer tube through crown and down to the dropouts: it’s not just lighter,
it’s stronger!
Our seatstays run full length from dropout to seat tube increasing lateral stiffness while
offering greater vertical compliance than standard larger diameter monostays.
Xenith’s “muscle” shaped chainstays are asymmetrical, with the driveside 10% larger than
the non-driveside, yielding 30% more volume & stiffness to offset drivetrain torque.
Our front derailleur clamp spreads shifting forces around the tube instead of localizing
them at one point as would the more standard rivet-on front derailleur perch.
The top of the Xenith seat tube is slotted twice on each side to spread clamp torque
around the tube, and seat posts are securely clamped with a lightweight 1-bolt 7075 seat
clamp
The larger 46mm bore diameter of the PressFit 30 BB system increases ply compaction
yielding a lighter frame with increased frame strength. Other advantages include:
Improved bearing-to-shell interface, greater bearing durability and simple installation.
Mavic’s Aksium Race wheelset features top Mavic technologies at entry level price point.
Straight pull aero spokes, lightweight welded rims, cartridge bearing hubs, all at a sub
1800g package.
Shimano’s 105 compact 50/34 crank with Press Fit 30 and Wheels Mfg adaptors take full
advantage of the oversized BB shell, larger BB30 bearings while keeping a full Shimano
group for better shifting.
The compact chainring concept is revolutionary: a 34T inner chainring offers a 15% lower
gear ratio than traditional 39T double ringe’d road cranks, but the 50T outer loses only 6%
off the top end compared to the 53T traditional outer. You get the hill climbing capability
of a triple, yet less weight than a standard double
Shimano’s 6700 Ultegra drivetrain assures light, precise shifting over all 20 speeds and
offers carbon fiber STI levers.
Tektro forged brake calipers with sure stopping SwissStop pads deliver solid, predictable
braking performance.
Selle San Marco new SPID Glamour Arrowhead was modeled on the successful Aspide
Glamour, designed with female racer feedback specifically for women.
|
|
|
|
|
|
|
